Error estimation for the automated multi‐level substructuring method

In this study, we propose an effective method to estimate the reliability of finite element models reduced by the automated multi‐level substructuring (AMLS) method. The proposed error estimation method can accurately predict relative eigenvalue errors in reduced finite element models. A new, enhanced transformation matrix for the AMLS method is derived from the original transformation matrix by properly considering the contribution of residual substructural modes. The enhanced transformation matrix is an important prerequisite to develop the error estimation method. Adopting the basic concept of the error estimation method recently developed for the Craig–Bampton method, an error estimation method is developed for the AMLS method. Through various numerical examples, we demonstrate the accuracy of the proposed error estimation method and explore its computational efficiency. Copyright © 2015 John Wiley & Sons, Ltd.     

Recent Advances in Rolling 2D TMDs Nanosheets into 1D TMDs Nanotubes/Nanoscrolls

Transition metal dichalcogenides (TMDs) van der Waals (vdW) 1D heterostructures are recently synthesized from 2D nanosheets, which open up new opportunities for potential applications in electronic and optoelectronic devices. The most recent and promising strategies in regards to forming 1D TMDs nanotubes (NTs) or nanoscrolls (NSs) in this review article as well as their heterostructures that are produced from 2D TMDs are summarized. In order to improve the functionality of ultrathin 1D TMDs that are coaxially combined with boron nitride nanotubes and single-walled carbon nanotubes. 1D heterostructured devices perform better than 2D TMD nanosheets when the two devices are compared. The photovoltaic effect in WS₂ or MoS₂ NTs without a junction may exceed the Shockley–Queisser limit for the above-band-gap photovoltage generation. Photoelectrochemical hydrogen evolution is accelerated when monolayer WS₂ or MoS₂ NSs are incorporated into a heterojunction. In addition, the photovoltaic performance of the WSe₂/MoS₂ NSs junction is superior to that of the performance of MoS₂ NSs. The summary of the current research about 1D TMDs can be used in a variety of ways, which assists in the development of new types of nanoscale optoelectronic devices. Finally, it also summarizes the current challenges and prospects.     

Preparation of nanometre size oxide particles using filter expansion aerosol generator

Crystalline zinc oxide particles of nanometre size (< 20 nm) particles were produced from a zinc acetate solution by using a filter expansion aerosol generator (FEAG). The FEAG is an aerosol generator that is operated at 60 torr reactor pressure and produces droplets of around 2 m. The shape of the particles produced by the FEAG were distinctively different from those produced by the ultrasonic spray source (USS). Results from scanning electron microscopy (SEM) and X-ray diffractometry (XRD) indicated that crystalline zinc oxide particles of nanometre size were produced at 600 °C in 0.02 s residence time. Weight loss of these particles, determined by thermogravimetric analysis (TGA), was 3 wt%. Based on the morphology change as a function of the reactor temperature and solute concentration, we proposed that the nanometre particles were formed by uniform precipitation at the drying stage and decomposition followed by disintegration into nanometre particles. It was also shown that exothermic decomposition of the solute was not required for the disintegration of the primary particles in the FEAG process. This result opened up an opportunity for producing carbon-free nanometre particles from nitrate salts by using the FEAG.     

Study on the solidification cracking behaviour of high strength aluminum alloy welds: Effects of alloying elements and solidification behaviours

The solidification cracking susceptibility of the 7000 series Al-Zn-Mg high strength aluminum alloy has been studied. The cracking behaviour of the specimens were evaluated by a Tig-a-Ma-Jig Varestraint test process under various augmented strain conditions. It has been experimentally observed that the addition of copper decreased the solidification cracking resistivity of the high strength aluminum alloy weld metal by increasing the total crack length (TCL). The effect of the addition of manganese on the solidification cracking behaviour is found to be beneficial by markedly decreasing the solidification cracking susceptibility as the manganese content increases from 0.3 to 0.7%. This enhancement by manganese is understood to be attributed to the reduction of the mushy zone size during the solidification process. The effects of chromium and zirconium additions are also investigated. The weld metal containing zirconium is less sensitive to the solidification cracking than the weld metal containing chromium. In addition, the solidification behaviours of the tested alloys are also investigated and it is found that as the solidification temperature range (T) becomes narrow, the solidified structure becomes more dendritic in its features which is believed to create higher solidification cracking resistance.     

Reliability-based design optimization with confidence level under input model uncertainty due to limited test data

For obtaining a correct reliability-based optimum design, the input statistical model, which includes marginal and joint distributions of input random variables, needs to be accurately estimated. However, in most engineering applications, only limited data on input variables are available due to expensive testing costs. The input statistical model estimated from the insufficient data will be inaccurate, which leads to an unreliable optimum design. In this paper, reliability-based design optimization (RBDO) with the confidence level for input normal random variables is proposed to offset the inaccurate estimation of the input statistical model by using adjusted standard deviation and correlation coefficient that include the effect of inaccurate estimation of mean, standard deviation, and correlation coefficient.